Guides - Troubleshooting General Issues on Compute Instances

This guide provides common troubleshooting scenarios you may encounter when managing your Compute Instance. Each troubleshooting section provides ways to further diagnose your issue and the corresponding steps, when applicable, to resolve the issue. We recommend using this guide in the following way:

• Browse the guide’s headings and select the issue that best describes your problem.

• Follow the troubleshooting steps in the order they are presented.

• Once you’ve confirmed a specific problem, try fixing it with the suggested solutions.

If the troubleshooting steps in this guide don’t apply to your issue, review these additional troubleshooting guides that cover other topics:

• Troubleshooting Connection Issues
• Troubleshooting SSH Issues
• Troubleshooting Memory Issues
• Troubleshooting Firewall Issues
• Troubleshooting Web Servers, Databases, and Other Services

Compute Instance is Unresponsive

If your Compute Instance is unresponsive, either at the Lish console or to basic network requests, read through the Troubleshooting Basic Connection Issues guide.

Compute Instance is Slow

Is the Disk Full?

If your Compute Instance’s disk is full, this can cause performance degradation and instability for your applications. Use the following command to determine the free space on your instance’s filesystem:

df -h

The output will resemble the following example:

Filesystem      Size  Used Avail Use% Mounted on
/dev/root       189G  166G   14G  93% /
devtmpfs        3.9G     0  3.9G   0% /dev
tmpfs           3.9G   16K  3.9G   1% /dev/shm
tmpfs           3.9G  399M  3.6G  10% /run
tmpfs           5.0M     0  5.0M   0% /run/lock
tmpfs           3.9G     0  3.9G   0% /sys/fs/cgroup
tmpfs           799M     0  799M   0% /run/user/1000

In the example output, you can see that the root filesystem is 93% full. Issue the following command to list all files over 200MB on your root filesystem:

sudo find / -xdev -type f -size +200M -exec ls -lah {} \;

You can adjust the +200M value in this command, as needed, to search for files above a specific size.

Deleted Files

If a service deletes a file that it is no longer needed, the file remains on your disk until the next time the service has been rebooted. The following example demonstrates how deleted files belonging to Apache can continue to take up space after they have been deleted.

Use the following command to check for deleted files that are currently open:

sudo lsof | grep deleted  | numfmt --field=8 --to=iec

This command will check the output of lsof for files marked as deleted, and will convert the file sizes so that they’re more easily readable. In this example Apache is holding on to several old files:

apache2   32341         www-data   13u      REG                8,0          0        24K /tmp/.ZendSem.OmCTIC (deleted)
apache2   32341         www-data   14w      REG               0,19          0       243M /run/lock/apache2/proxy.13748 (deleted)
apache2   32341         www-data   15w      REG               0,19          0       243M /run/lock/apache2/mpm-accept.13748 (deleted)
apache2   32342         www-data   12w      REG               0,19          0       158M /run/lock/apache2/ssl-cache.13747 (deleted)
apache2   32342         www-data   13u      REG                8,0          0        24K /tmp/.ZendSem.OmCTIC (deleted)
apache2   32342         www-data   14w      REG               0,19          0       243M /run/lock/apache2/proxy.13748 (deleted)
apache2   32342         www-data   15wW     REG               0,19          0       243M /run/lock/apache2/mpm-accept.13748 (deleted)
apache2   32343         www-data   12w      REG               0,19          0       158M /run/lock/apache2/ssl-cache.13747 (deleted)

To free up this space, you can simply restart the Apache service on your Compute Instance. This command restarts the Apache service using systemd on Ubuntu 18.04:

sudo systemd restart apache2

Is the Compute Instance Out of Memory?

The applications on your Compute Instance require a certain amount of physical memory to function correctly. If all of the available physical memory is consumed, your system could slow down, display out of memory errors, or become unresponsive. Here’s how to tell if your instance is out of memory:

1. Log in to Cloud Manager .
2. Click the Linodes link in the sidebar to view a list of all your Compute Instance.
3. Select a Compute Instance to view its dashboard.
4. Click on the Launch Console link in the upper-right hand corner to launch the LISH Console. The LISH console window appears. If memory errors are displayed in the LISH console, stop some running services to free up memory or upgrade to a larger plan .
5. Read through the Troubleshooting Memory and Networking Issues guide for troubleshooting commands which display your memory use.
6. If an application is consuming all of your available memory, you have three options. You can kill the application, change the application’s settings to reduce its memory footprint, or upgrade your instance to a larger plan.

If your Compute Instance is not out of memory, continue to the next section.

Is there a Disk I/O Bottleneck?

Disk input/output (I/O) bottlenecks can occur when an application or service is reading or writing an excessive amount of information to disk and the processor has to wait to process the information. High I/O wait can significantly slow down your server. To determine if your server currently has an I/O bottleneck, follow the steps below:

1. Log in to your Compute Instance via SSH .

2. Enter top to access the top monitoring utility. The screen shown below appears.

   

3. Examine the I/O wait percentage, as shown above. If the number is zero, your server does not currently have a bottleneck.

4. If your I/O wait percentage is above zero, verify that your server has enough free memory available . In many cases, high I/O is an indication that your server has started “swapping,” or using disk space as memory.

5. If your server has free memory available and is not using swap space, use iotop or vmstat to find the application responsible for the excessive I/O. Databases are often a source of excessive I/O. You may need to stop and/or reconfigure the application.

   Note

   You must run iotop as root or with sudo.

6. If you cannot determine the source of the IO bottleneck, contact Linode support for assistance.

Since top only reports what is currently happening, and most I/O issues are temporary, it helps to have a monitoring utility set up so you can see a graph of I/O trends and spot potential issues before they become major problems. See the guides in Server Monitoring for instructions on setting up a server monitoring utility.

Website is Not Loading

If your website is unresponsive or not loading correctly, read through the Troubleshooting Web Servers, Databases, and Other Services guide.

Can’t Connect via SSH or FTP

If you can’t connect to your Compute Instance over SSH, read through the Troubleshooting SSH guide.

Are You Using Telnet or FTP?

Telnet and FTP are disabled on your Compute Instance by default, and we strongly recommend that you do not use those protocols. Instead, please use Secure Shell (SSH) and SSH File Transfer Protocol (SFTP) – the secure versions of the Telnet and FTP protocols. All Compute Instances come with an SSH server enabled, and you can connect to port 22 with SSH and SFTP clients. For more information, see Connecting to Your Compute Instance .

Forgot My Username or Password

System User/Root Password

If you’ve forgotten the password for the root user on your Compute Instance, you can follow the steps for resetting your root password from Cloud Manager.

Once you have access to your Compute Instance as the root user, you can reset the password for any additional system users with the passwd command. The example resets the password for the username user:

passwd username

Cloud Manager User

• If you forget your Cloud Manager username, you can confirm it by supplying your email address on the Recover Username page.

• Assuming you know your Cloud Manager username, but you’ve forgotten the password, you can retrieve it on the Forgot Password page.

If you’ve followed these steps, but you’re still having trouble accessing your account, please contact Support .

Cloud Manager is Displaying “Incorrect” Information

Use the following checklist if Cloud Manager is displaying “incorrect” information.

Did You Recently Change your Account?

If you recently created a new account, resized an existing Compute Instance, or added extra bandwidth, the bandwidth displayed in Cloud Manager will be prorated for the amount of time left in the current billing cycle. For example, if you create an account on the 15th day of the month, the Manager will indicate that your account has been allocated half of the plan’s bandwidth for the current month. This information is an accurate representation of the bandwidth available for the rest of the billing period. When then next billing period starts, the Manager will indicate that all of the plan’s bandwidth is available. View the Billing and Payments guide for more information.

Did You Add Additional Storage?

If you recently upgraded your plan, your Compute Instance won’t be able to take advantage of the additional space until you resize the disk. You can use Cloud Manager to verify if there’s additional storage space available for disks:

1. Log in to Cloud Manager .

2. Click the Linodes link in the sidebar to view a list of your Compute Instances.

3. Select a Compute Instance and the Storage tab.

4. Compare the total available disk space with the Size Column in the Disks table. If you have free storage space, you can allocate that space to your existing disks, or create new disks as needed.

   Follow our steps for resizing a disk to take advantage of the extra space.