Troubleshoot SSH Key Authentication Issues

What is SSH (Secure Shell Protocol)?

The Secure Shell Protocol (SSH) increases the security of remote network services through the use of public-key cryptography. All SSH communications are encrypted using a “shared key”, which is used to both encrypt and decrypt messages on both ends. This is referred to as symmetrical encryption. It permits users to log in to a server more securely with a password.

SSH also permits authentication and access without a password. It accomplishes this by using a manually generated public-private key pair, which enables asymmetrical encryption. Although asymmetrical encryption is more secure, errors can occur if there is a problem with the key at either end of the connection. In these cases, users might receive a Permission denied (publickey) error and be unable to connect. This can be especially troublesome if password authentication is turned off. This guide explains how to debug and resolve SSH public key permission errors that prevent access to your Linode.

SSH Keys: An Overview

When SSH asymmetrical encryption is working properly, two keys are in operation. The client requesting access shares its public key with the target system, while secretly holding on to the private key. The private key can decrypt messages that were encrypted by the public key. However, the public key cannot decrypt messages from the private key, nor can it be used to reconstruct the private key.

To initiate the connection, the client sends the ID of the key pair to the target. The target uses the ID to retrieve the correct public key from its authorized_keys account. It generates a magic number, encrypts it using the key, and transmits it back to the originator. The client can decode this message because it possesses a private key. This enables it to echo the number back to the target, thereby verifying its identity.

All these messages are further encrypted using the shared session key that was generated when the connection was opened. The private-public key pair is not used to encrypt data after the connection is established. Only the shared session key is used for this. More detailed information about SSH can be found on the SSH Wikipedia page.

SSH Key Permission Errors: The Main Causes

If any part of the SSH negotiation fails, the connection is not established. In these cases, the error message Permission denied (publickey) is displayed. Most permission errors of this type can be traced back to one of the following three reasons:

1. The client is using the wrong public key or the wrong identifier.
2. The client does not possess a private key.
3. The target server does not have a copy of the public key.

Each of these cases is covered in its own separate section. The following instructions are geared to Ubuntu-style distributions, but are generally applicable to all Linux systems.

Debug and Fix SSH Connection Errors

Before proceeding, you can extract some information about the failure and potentially work around the issue.

1. Retrieve more information about the cause of the errors using the vvv option. Substitute your accountname and ip_address of the target for the placeholder values. This command provides a log of the actions the client and target server take while trying to connect. A sample of the output is shown below.

    ssh -vvv <accountname>@<ip_address>
   

   debug1: Reading configuration data /etc/ssh/ssh_config
   debug1: /etc/ssh/ssh_config line 47: Applying options for *
   debug2: resolve_canonicalize: hostname XX.XX.XX.XX is address
   debug2: ssh_connect_direct
   debug1: Connecting to XX.XX.XX.XX[XX.XX.XX.XX] port 22.
   debug1: Connection established.
   debug1: identity file /Users/username/.ssh/id_rsa type 0
       

2. If password authentication is enabled on the target server, try to override the public key method altogether and simply use your password. Use the following command to force password authentication.

    ssh -o PreferredAuthentications=password -o PubkeyAuthentication=no <accountname>@<ip_address>
   

3. If you were able to gain access to your Linode in the previous step, follow our Use SSH Public Key Authentication on Linux, macOS, and Windows guide to properly configure public key authentication.

4. (Optional) If you do not want to use public-key authentication in the future, turn off PubKeyAuthentication in the /etc/ssh/sshd_config file.

    vi /etc/ssh/sshd_config
   

   File: /etc/ssh/sshd_config

   1 2 3 4 5 6

   ... PubKeyAuthentication No ... PasswordAuthentication Yes ...

5. If you turned off public key authentication (PubKeyAuthentication) in the previous step, restart the SSH daemon to apply the change.

    systemctl restart sshd
   

SSH Client: Incorrect Key is in Use

If there are several keys on the client, it is possible that SSH is choosing an old or incorrect key. You can select a specific key using the -i option.

Specify the exact key pair using the following command:

ssh -i /path/to/key/id_rsa <accountname>@<ip_address>

The SSH Client Does Not Possess the Correct Private Key

This section covers the situation where the client does not have the correct private key and password authentication is not enabled on the server. In this case, use the Linode Shell , also known as the LISH Console, to access the Linode.

1. Log in to the Linode using the LISH Console . The LISH Console can be accessed from the Linode Cloud Manager . Select the appropriate Linode, and click the Launch LISH Console link at the top right-hand side of the page.

2. Edit the file located at /etc/ssh/sshd_config and change the value of PasswordAuthentication to Yes. If you are not planning to generate and use an SSH private key in the near future, change PubKeyAuthentication to No at the same time.

    vi /etc/ssh/sshd_config
   

   File: /etc/ssh/sshd_config

   1 2 3 4 5 6

   ... PubKeyAuthentication No ... PasswordAuthentication Yes ...

3. Restart the sshd service to apply the changes.

    systemctl restart sshd
   

4. Use SSH to access the Linode using only a password.

The Target Server Does Not Have a Copy of the Public Key

This situation arises because the target server does not have your public key. Without that information, it cannot locate the key when it receives the SSH request. To correct this, copy the public key into the authorized_keys file in your directory on the Linode. For more information on how to generate a public key, see our Use SSH Public Key Authentication on Linux, macOS, and Windows guide.

1. Locate the file containing the public key file on your client. The file is usually named id_rsa.pub. On macOS devices, it is typically located at /Users/<username>/.ssh/, while on Linux systems it can be found at /home/<username>/.ssh/. On Windows systems, the file location is user-defined.

2. Inspect the contents of this file using either a text editor or the cat utility. A sample key is displayed below. Keep this file open for later.

    cat ~/.ssh/id_rsa.pub
   

   Important

   Share only your public key. Your private key, which is usually named id_rsa, must always be kept secret.

   File: /Users/<username>/.ssh/id_rsa.pub

   1 2 3 4 5 6

   ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAACAQC3tvOQFGAnY3p1t6gv6rXEat8maN YghZYuAuci3Pd0gEr3MHMFwZ3NqYA87VM+HLbu9EbBjvPjuFmNkdT7yN8TJkv1Z61g +NJ3+aJBGHNe8MDKs69z3yNgakiI2ynT8+GDOz545fQfZdyl5oQ9IvcODz0k7yoKP9 yQdSj8l9dCN9Zf8GBLQTbryHgaSEoinpX5SFmNkdT7yN8TJkv1Z61gpB+NJ3+aJBGH Jvl72P8ePqG2nIvSqHsm/4OfdJshaXHA+j6DpvSQ== user@userdevice.local

3. Log in to the Linode through the LISH Console . Access the LISH Console through the Linode Cloud Manager . Select the Linode to access, then click the Launch LISH Console link at the top right-hand side of the page.

4. Display the contents of the ~/.ssh/authorized_keys file.

    cat ~/.ssh/authorized_keys
   

5. If the file exists, verify whether your public key is among the entries. If it does not match one of the keys, or if the file is empty or does not exist, you must add the key.

6. If necessary, create the .ssh directory and the authorized_keys file. Enter the following command on the target server to verify whether the directory exists.

    ls ~/.ssh/
   

   If the system displays an error, create the folder and set its permissions as follows:

    mkdir -p ~/.ssh
    chmod 700 ~/.ssh
   

7. Determine whether the authorized_keys file exists using the following command:

    ls ~/.ssh/authorized_keys
   

   In the event of an error, create the file and set the correct permissions for it.

    touch ~/.ssh/authorized_keys
    chmod 600 ~/.ssh/authorized_keys
   

8. If you are using a macOS or Linux system as a client, use the scp utility to securely copy the contents of your public key. The first argument to scp should be the location of the public key on the client. The second parameter is your accountname and the ip_address of the target, a : symbol, and the location of the authorized_keys file on the target.

    scp ~/.ssh/id_rsa.pub <accountname>@<ip_address>:~/.ssh/authorized_keys
   

   Note

   If your client does not have the scp tool installed, copy the key to the target server manually. Open the public key file and copy the entire key, including the ssh-rsa prefix and the user identifier at the end. Then open the authorized_keys file on the target server and add a new line to the end of the file. Paste in the public key you copied earlier. Each key should be on its own line and should not contain any line breaks. Save and close the file.

9. Ensure public key authentication is permitted on the target server. Set PubKeyAuthentication to Yes in the sshd_config file. To completely disable password authentication, set PasswordAuthentication to No.

    vi /etc/ssh/sshd_config
   

   File: /etc/ssh/sshd_config

   1 2 3 4 5 6

   ... PubKeyAuthentication Yes ... PasswordAuthentication No ...

10. Restart the sshd service to apply the changes.

     systemctl restart sshd
    

11. Try accessing the target server without entering a password. Your private key should be used to authenticate the connection.

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

• SSH Protocol
• SSH Wikipedia